All posts tagged lamp

Ponga lamp

image

My latest lamp creation I call it the Ponga, is a #bootfair vase. Coupled with a nicely crafted piece of mahogany for the base. Wired with some gold braided flex and I’m liking the outcome.

 

Moa toes

been working on a few new lamps recently in between different projects. And I call this one Moa toes. The Moa was a native bird of New Zealand and became extinct around about the 15th century I believe. It was similar to an emu but much bigger and also flightless.  

 

Man of war lamp

When I first arrived in Hackney I moved into a basement flat that didn’t have doors, heating, plumbing or electrics, and in the middle of winter. Anyway, most of those got sorted in due time, but during the clear out, I discovered amoungst lots of junk the lovely glass shade featured in this piece.  

 

It’s absolutely stunning lit up and well worth the effort. 

Inspiration for the base came about from researching steampunk lamps and the different ideas people have made. It was a lot of fun and as always educational in terms of what I learnt and discovered regarding new metal working techniques and electrical methods. And I call it the ‘Man of War’ lamp after the Portuguese man of war jelly fish. 

 
I chose to make the switch as the only cable I had that worked with the shade and frame, was the spiralized one shown, which needed to be managed neatly. So I achieved this using this industrial looking besa box and a dimmer module from a wall light switch. 

Very pleased with the outcome and I have a few more in the pipeline and will post when finished

Latest Lamp

So this weeks work incorporated this lamp. Bit of experimentation gone into this one in terms of refining my engineering techniques given my limited equipment, illustrated in some of the pix. Some steampunk ideas coming through with this project too. IMG_3697.JPG Pictured is a car disc rotor. I welded a bit of tubing on to the edge to assist with bending tubing for the lamp stem.

IMG_3695.JPG The bent tube stem welded to a hexagonal 2kg grocers weight. And a kettle I hacked to make the shade.

IMG_3701.JPG The union between the stem tube and the shade I created using 1mm gilding metal.

IMG_3712.JPGHere is the lamp wired for testing. I used spirit of salts to oxidise(rust) the steel and shade.

IMG_3717.JPGThe finished article. Found this little toggle switch in a junk shop in Bakers Arms London N17

Latest lamp

20140201-211521.jpg

Picking up on the current Edison bulb trend, I made this today incorporating one of the larger globe bulbs. The base is an axle stand. I like the green, however I’m gonna have this sand blasted and will clear coat.